How to Download PC Access Replacement Disk(s)

Quick Contents

Introduction

If you have difficulty installing PC Access for Windows from your factory original PC Access diskettes or you suspect that a one or more of your factory original PC Access diskette(s) has a virus or bad sector, you can Download Replacement Disk(s). You may find this method more convenient than Installing PC Access from the Hard Disk.

You may download replacement disk(s) if you are running anyone of the following PC Access versions:

• 4.10.107
• 4.20.117
• 4.20.120
• 4.20.120b
• 4.20.123
• 4.20.124
• 4.30.147
• 4.30.151
• 4.30.154
• 4.30.158

If you need to determine your version and Build number see: How to Determine your PC Access Version and Build Number.

PC Access for Windows version 4.10.107

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.10 Build 107 disk 2
   http://support.mfm.com/files/windows/pcaccess/images107/dkt2-107.exe

   PC Access for Windows 4.10 Build 107 disk 3
   http://support.mfm.com/files/windows/pcaccess/images107/dkt3-107.exe

   PC Access for Windows 4.10 Build 107 disk 4
   http://support.mfm.com/files/windows/pcaccess/images107/dkt4-107.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-107.exe
   • dkt3-107.exe
   • dkt4-107.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.20.117

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.20 Build 117 disk 2
   http://support.mfm.com/files/windows/pcaccess/images117/dkt2-117.exe

   PC Access for Windows 4.20 Build 117 disk 3
   http://support.mfm.com/files/windows/pcaccess/images117/dkt3-117.exe

   PC Access for Windows 4.20 Build 117 disk 4
   http://support.mfm.com/files/windows/pcaccess/images117/dkt4-117.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-117.exe
   • dkt3-117.exe
   • dkt4-117.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.20.120

There are two PC Access 4.20.120 Build versions, 4.20.120 and 4.20.120b. Before you can download a replacement disk, you need to know what Build version you are running. Follow the instructions below to determine your Build version.

1. Insert one of your PC Access Disks into your 3.5" diskette drive. In the example below, we will use disk 2.
2. Click Start | Programs | MS-DOS Prompt.
3. In the MS-DOS Prompt window, type:

       A:
       DIR
       

   • Note: The instructions above, assume that your 3.5" diskette drive is A:.
4. Look for the DATA2.CAB file.
   • Note: PC Access will replace the number 2 in the DATA2.CAB file name with the number of the disk you inserted into your diskette drive. For example, If you inserted disk 3 into your diskette drive, the file name will be DATA3.CAB.
5. Look at the date on the DATA2.CAB file. If the date is 06-27-97 you are running Build 4.20.120 and can continue with the instructions below. If the date is 07-14-97 you are running Build 4.20.120b and should follow these instructions to download a replacement disk.

Version 4.20.120 Replacement Disks

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.20 Build 120 disk 2
   http://support.mfm.com/files/windows/pcaccess/images120/dkt2-120.exe

   PC Access for Windows 4.20 Build 120 disk 3
   http://support.mfm.com/files/windows/pcaccess/images120/dkt3-120.exe

   PC Access for Windows 4.20 Build 120 disk 4
   http://support.mfm.com/files/windows/pcaccess/images120/dkt4-120.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-120.exe
   • dkt3-120.exe
   • dkt4-120.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.20.120b

• Note: There are two PC Access 4.20.120 Build versions, 4.20.120 and 4.20.120b. If you need to know what build version you are running, follow the instructions here. If you already know you are running build version 4.20.120b, continue with the instructions below

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.20 Build 120b disk 2
   http://support.mfm.com/files/windows/pcaccess/images120b/dkt2-120b.exe

   PC Access for Windows 4.20 Build 120b disk 3
   http://support.mfm.com/files/windows/pcaccess/images120b/dkt3-120b.exe

   PC Access for Windows 4.20 Build 120b disk 4
   http://support.mfm.com/files/windows/pcaccess/images120b/dkt4-120b.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-120b.exe
   • dkt3-120b.exe
   • dkt4-120b.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.20.123

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.20 Build 123 disk 2
   http://support.mfm.com/files/windows/pcaccess/images123/dkt2-123.exe

   PC Access for Windows 4.20 Build 123 disk 3
   http://support.mfm.com/files/windows/pcaccess/images123/dkt3-123.exe

   PC Access for Windows 4.20 Build 123 disk 4
   http://support.mfm.com/files/windows/pcaccess/images123/dkt4-123.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-123.exe
   • dkt3-123.exe
   • dkt4-123.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.20.124

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.20 Build 124 disk 2
   http://support.mfm.com/files/windows/pcaccess/images124/dkt2-124.exe

   PC Access for Windows 4.20 Build 124 disk 3
   http://support.mfm.com/files/windows/pcaccess/images124/dkt3-124.exe

   PC Access for Windows 4.20 Build 124 disk 4
   http://support.mfm.com/files/windows/pcaccess/images124/dkt4-124.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-124.exe
   • dkt3-124.exe
   • dkt4-124.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.30.147

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.30 Build 147 disk 2
   http://support.mfm.com/files/windows/pcaccess/images147/dkt2-147.exe

   PC Access for Windows 4.30 Build 147 disk 3
   http://support.mfm.com/files/windows/pcaccess/images147/dkt3-147.exe

   PC Access for Windows 4.30 Build 147 disk 4
   http://support.mfm.com/files/windows/pcaccess/images147/dkt4-147.exe

   PC Access for Windows 4.30 Build 147 disk 5
   http://support.mfm.com/files/windows/pcaccess/images147/dkt5-147.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-147.exe
   • dkt3-147.exe
   • dkt4-147.exe
   • dkt5-147.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.30.151

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.30 Build 151 disk 2
   http://support.mfm.com/files/windows/pcaccess/images151/dkt2-151.exe

   PC Access for Windows 4.30 Build 151 disk 3
   http://support.mfm.com/files/windows/pcaccess/images151/dkt3-151.exe

   PC Access for Windows 4.30 Build 151 disk 4
   http://support.mfm.com/files/windows/pcaccess/images151/dkt4-151.exe

   PC Access for Windows 4.30 Build 151 disk 5
   http://support.mfm.com/files/windows/pcaccess/images151/dkt5-151.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-151.exe
   • dkt3-151.exe
   • dkt4-151.exe
   • dkt5-151.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.30.154

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.30 Build 154 disk 2
   http://support.mfm.com/files/windows/pcaccess/images154/dkt2-154.exe

   PC Access for Windows 4.30 Build 154 disk 3
   http://support.mfm.com/files/windows/pcaccess/images154/dkt3-154.exe

   PC Access for Windows 4.30 Build 154 disk 4
   http://support.mfm.com/files/windows/pcaccess/images154/dkt4-154.exe

   PC Access for Windows 4.30 Build 154 disk 5
   http://support.mfm.com/files/windows/pcaccess/images154/dkt5-154.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-154.exe
   • dkt3-154.exe
   • dkt4-154.exe
   • dkt5-154.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

PC Access for Windows version 4.30.158

1. Click the link to the disk image file(s) you need to download. Save the disk image file(s) to the C:\TEMP folder on your hard drive. If you do not have a C:\TEMP folder on your hard drive, use Windows Explorer to create one.

   PC Access for Windows 4.30 Build 158 disk 2
   http://support.mfm.com/files/windows/pcaccess/images158/dkt2-158.exe

   PC Access for Windows 4.30 Build 158 disk 3
   http://support.mfm.com/files/windows/pcaccess/images158/dkt3-158.exe

   PC Access for Windows 4.30 Build 158 disk 4
   http://support.mfm.com/files/windows/pcaccess/images158/dkt4-158.exe

   PC Access for Windows 4.30 Build 158 disk 5
   http://support.mfm.com/files/windows/pcaccess/images158/dkt5-158.exe

   • Note: If you need instructions on downloading files from MFM's FTP Site, see: How to Download files from MFM's FTP Site
2. In the instructions that follow we will use the C:\TEMP folder. Depending upon the file(s) you downloaded, the file name in the following instructions will be one of the following:
   • dkt2-158.exe
   • dkt3-158.exe
   • dkt4-158.exe
   • dkt5-158.exe

3. After you have downloaded the disk image file(s) you need:
   • Windows 95/98 users: Click Start | Programs | Windows Explorer
   • Windows NT 4.0 users: Click Start | Programs | Windows NT Explorer
   • Windows 2000 users: Click Start | Programs | Accessories | Windows Explorer
4. In Windows Explorer go to the C:\TEMP folder.
5. In C:\TEMP, double-click on the disk image file you downloaded. WinZip prompts you to extract the contents of the file to A:\.
6. Insert a blank formatted disk in drive A:\

   WARNING: Do not use your factory original PC Access disk(s). Instead, you should use a blank formatted disk.

   • Note: If you do not know how to format a disk, see the Formatting Disks help topic in your Windows Help File. To access your Windows Help File, click Start | Help.

7. In the WinZip Self-Extractor window, click Unzip. WinZip will extract the contents of the disk image file to the 3.5" disk in drive A:\.
8. A WinZip Self-Extractor window will display this message: " file(s) unzipped successfully". Click OK to close this window. Click Close to exit WinZip.
9. Remove the 3.5" disk from drive A:\.
10. If you downloaded more than one PC Access disk image file, repeat steps 3 - 9 for the remaining disk image file(s)
11. Use the disk(s) you just created to Install PC Access.

If you need further assistance, please complete the PC Access for Windows Problem Report Form.